| Tipo de rolamento | Dimensão de forma externas(mm) | Carga nominal(KN) | Weight(kg) | ||||||||||||||
| d | D | B | D1 | D2 | n1 | n2 | d1 | d11 | t1 | d2 | d21 | t2 | rsmin | Cr | Cor | ||
| RU 42 | 20 | 70 | 12 | 57 | 28 | 6 | 6 | 3.4 | 6.5 | 3.3 | M3 | --- | --- | 0.6 | 7.35 | 8.35 | 0.29 |
| RU 66 | 35 | 95 | 15 | 83 | 45 | 8 | 8 | 4.5 | 8 | 4.4 | M4 | --- | --- | 0.6 | 17.5 | 22.3 | 0.62 |
| RU 85 | 55 | 120 | 15 | 105 | 65 | 8 | 8 | 5.5 | 9.5 | 5.4 | M5 | --- | --- | 0.6 | 30.3 | 29.5 | 1 |
| RU 124(G) | 80 | 165 | 22 | 148 | 97 | 10 | 10 | 5.5 | 9.5 | 5.4 | 5.5 | 9.5 | 5.4 | 1 | 33.1 | 50.9 | 2.6 |
| RU 124X | 80 | 165 | 22 | 148 | 97 | 10 | 10 | 5.5 | 9.5 | 5.4 | M5 | --- | --- | 1 | 33.1 | 50.9 | 2.6 |
| RU 148(G) | 90 | 210 | 25 | 187 | 112 | 12 | 12 | 9 | 14 | 8.6 | 9 | 14 | 8.6 | 1.5 | 49.1 | 76.8 | 4.9 |
| RU 148X | 90 | 210 | 25 | 187 | 112 | 12 | 12 | 9 | 14 | 8.6 | M8 | --- | --- | 1.5 | 49.1 | 76.8 | 4.9 |
| RU 178(G) | 115 | 240 | 28 | 217 | 139 | 12 | 12 | 9 | 14 | 8.6 | 9 | 14 | 8.6 | 1.5 | 80.3 | 135 | 6.8 |
| RU 178X | 115 | 240 | 28 | 217 | 139 | 12 | 12 | 9 | 14 | 8.6 | M8 | --- | --- | 1.5 | 80.3 | 135 | 6.8 |
| RU 228(G) | 160 | 295 | 35 | 270 | 184 | 12 | 12 | 11 | 17.5 | 10.8 | 11 | 17.5 | 10.8 | 2 | 104 | 173 | 11.4 |
| RU 228X | 160 | 295 | 35 | 270 | 184 | 12 | 12 | 11 | 17.5 | 10.8 | M10 | --- | --- | 2 | 104 | 173 | 11.4 |
| RU 297(G) | 210 | 380 | 40 | 350 | 240 | 16 | 16 | 14 | 20 | 13 | 14 | 20 | 13 | 2.5 | 156 | 281 | 21.3 |
| RU 297X | 210 | 380 | 40 | 350 | 240 | 16 | 16 | 14 | 20 | 13 | M12 | --- | --- | 2.5 | 156 | 281 | 21.3 |
| RU 445(G) | 350 | 540 | 45 | 505 | 385 | 24 | 24 | 14 | 20 | 13 | 14 | 20 | 13 | 2.5 | 222 | 473 | 35.4 |
| RU 445X | 350 | 540 | 45 | 505 | 385 | 24 | 24 | 14 | 20 | 13 | M12 | --- | --- | 2.5 | 222 | 473 | 35.4 |
LYNB Crossed Roller Bearings RU series (THK corresponding to RU series, Integrated Inner/Outer ring design).Since holes are drilled for Dimensão de furos de montagem, the need for a presser flange and a housing is eliminated. Also, owing to the integrated Inner/outer ring type structure with washer, there is almost Tipo sem engrenagem effect from installation on performance, allowing stable rotational accuracy and torque to be obtained. Can be used for both outer and inner ring rotaion.
▲ The design’s of all these Crossed Roller Bearings RU series are based on standard structures; LYNB can design and manufacture many other similar structures in accordance to the special and particular requirements of their customers’. If our customer’s have specific requests then the customer should identify the structure, and Dimensão de furos de montagem dimensions that are required. Please contact the LYNB Technical Center if you need any assistance in this area.
